Images are representations only.

Series TE Duct & Immersion Building Automation Temperature Sensor

Brand: Dwyer Instruments, LLC

Free Shipping on Orders Over $363.08 USD

The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit.

Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building.

Thermowells are recommended, but not required on the immersion sensors.

For variable air volume applications, the Series TE can be configured to have 8' plenum rated cable with flying leads. Standard units come with 4" leads with an integral terminal block to eliminate carrying extra wire nuts.

For housing models, multiple knockouts provide easy conduit access to any side of the housing. The 1/4 turn lid comes with a chain to prevent it from being lost during installation.
Features
  • Easy to mount external tab housing and flange options for duct applications
  • 1/4 turn housing cover with chain to prevent dropping
  • Multiple conduit knockouts for easy installation positioning
  • 8' plenum rated cable option
  • Terminal connector eliminates need for wire nuts
show more
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit.

Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building.

Thermowells are recommended, but not required on the immersion sensors.

For variable air volume applications, the Series TE can be configured to have 8' plenum rated cable with flying leads. Standard units come with 4" leads with an integral terminal block to eliminate carrying extra wire nuts.

For housing models, multiple knockouts provide easy conduit access to any side of the housing. The 1/4 turn lid comes with a chain to prevent it from being lost during installation.
Features
  • Easy to mount external tab housing and flange options for duct applications
  • 1/4 turn housing cover with chain to prevent dropping
  • Multiple conduit knockouts for easy installation positioning
  • 8' plenum rated cable option
  • Terminal connector eliminates need for wire nuts

Specifications

Accuracy

  • ± 0.15° C at 0° C (± 0.28° F at 32° F) - RTD, DIN Class A
  • ± 0.2° C at 25° C (± 0.36° F at 77° F) - Thermistor

Approvals & Certifications

  • GOST-R

Electrical Connectors

  • 4” Flying Leads Terminal Block

Enclosure, Body Material

  • 94 V-O Polycarbonate Plastic

Environmental Protection

  • IP66
  • NEMA 4X

Insertion 'U' Length

  • 12” (30 cm)
  • 18” (46 cm)
  • 2.5” (6.4 cm)
  • 4” (10.1 cm)
  • 6” (15.2 cm)
  • 8” (20.3 cm)

Mounting

  • Duct Mount
  • Immersion Mount

NPT Connection

  • 1/2” NPT Male
  • 1/4” NPT Male
  • 3/4” NPT Male

Operating Temperature

  • -40° to 150° C (-40° to 302° F)

Process Connection Style

  • Compression Fitting

Sensor / Probe Diameter

  • 1/4” O.D.

Sensor / Probe Type

  • RTD - Pt100 ohms, PT1,000 ohms
  • Thermistor - 10 kiloohms Typical II, 10 kiloohms Typical III, 3 kiloohms, 20 kiloohms

Termination

  • 4” Lead
  • 8 feet Plenum Rated Cable

Typical Applications

  • Building Automation
  • VAV Temperature Sensing
  • Chiller or Boiler Loops
  • AHU Monitoring